BSM300GA120DN2FS_E3256 Infineon IGBT

larger image

BSM300GA120DN2FS_E3256

Absolute maximum ratings (at Tc=25°C unless otherwise specified)

Item			Symbol	Rating		Unit
Item			Symbol	Max.	Min.	Unit
Bus Voltage		DC	VCC	0	450	V
		Surge	VDC(surge)	0	500	V
		Short operating	VSC	400	400	V
Collector-Emitter voltage *1			VCES	0	600	V
Inverter	Collector current	DC	IC	-	50	A
		1ms	ICP	-	100	A
		Duty=76.1% *2	-IC	-	50	A
	Collector power dissipation	One transistor *3	PC	-	144	W
brake	Collector current	DC	IC	-	30	A
	Collector current	1ms	ICP	-	60	A
	Forward current of Diode		IF	-	30	A
	Collector power dissipation	One transistor *3	PC	-	144	W
Supply voltage of Pre-Driver *4			VCC	-0.5	20	V
Input signal voltage *5			Vin	-0.5	VCC+0.5	V
Input signal current			Iin	-	3	mA
Alarm signal voltage *6			VALM	-0.5	VCC	V
Alarm signal current *7			IALM	-	20	mA
Junction temperature			Tj	-	150	^oC
Operating case temperature			Topr	-20	100	^oC
Storage temperature			Tstg	-40	125	^oC
Solder temperature *8			Tsol	-	260	^oC
Isolating voltage (Terminal to base, 50/60Hz sine wave 1min.)			Viso	-	AC2500	V
Screw Torque		Mounting (M5)		-	3.5 *6	N·m

Note

*1 : Vces shall be applied to the input voltage between terminal P and U or ‚V or W or DB, N and U or V or W or DB

*2 : 125°C/FWD Rth(j-c)/(Ic x VF MAX)=125/0.86/(50 x 2.0) x 100>100%

*3 : Pc=125°C/IGBT Rth(j-c)=125/0.44=287W [Inverter] Pc=125°C/IGBT Rth(j-c)=125/0.90=139W [Brake]

*4 : VCC shall be applied to the input voltage between terminal No.4 and 1, 8 and 5, 12 and 9, 14 and 13

*5 : Vin shall be applied to the input voltage between terminal No.3 and 1, 7 and 5, 11 and 9, 16,17,18 and 13.

*6 :VALM shall be applied to the voltage between terminal No.2 and 1, No6 and 5, No10 and 9, No.19 and 13.

*7 : IALMshall be applied to the input current to terminal No.2,6,10 and 19.

*8 : Immersion time 10±1sec.