SMCS6G25-60 is an, integrated three-phase sensorless brushless DC motor controller/driver subsystems housed in a 43 Pin power flatpack. SMCS6G25-60 is a completely self-contained motor controller that converts an analog input command signal into a motor speed. SMCS6G25-60 is best used as a two quadrant speed controller for controlling/driving fans, pumps, and motors in applications which require small size.SMCS6G25-60 is available with an IGBT power stage for DC bus voltage up to 400V. The small size of this complete motor control module makes it ideal for commercial aerospace and military applications.

FEATURES

Two Quadrant Mode of Operation.
Fully integrated 3-Phase Sensorless Brushless DC Motor Control Subsystem includes power stage, non-isolated driver stage, and controller stage
GBT Output Stage, with low saturation voltage.
20A peak Phase Current with up to400V Maximum DC Bus Voltage
Internal Precision Current Sense Resistor
Cycle by cycle current limiting.
Fixed frequency PWM.
Direction Input for Direction Reversal.
Tacho output with frequency proportional to speed
Analog or PWM command input.
Hermetic or non-hermetic device (3.10" x 2.10" x 0.385")

APPLICATIONS

Fans and Pumps

KEY PARAMETER ABSOLUTE MAXIMUM RATINGS (TC=25 ^oC) unless otherwise noted

Characteristic	Maximum
Operating DC Bus Supply Voltage	400 V
Maximum Peak DC Bus Supply Voltage	600 V
Average Output Current	20 A
Peak Output Current	25 A
+15V Supply Voltage	+16.5 V
Logic Input Voltage	-0.3 V to +5.5 V
Operating & Storage Junction Temperature	-55°C to +150 °C
IGBT Junction-to-Case Thermal Resistance R_thjC Diode Junction-to-Case Thermal Resistance R_thjC	1.0 °C/W 1.7 °C/W
Pin-to-Case Voltage Isolation, at room conditions SMCS6G25-60 SMCS6G25-60-1	600V DC 1000V DC
Lead Soldering Temperature, 10 seconds maximum, 0.125” from case * Tcase = 25°C	300°C